16530 RS232 / RS 485 to ethernet converter - RS232/485 TO ETH

The RS232/485 TO ETH is an industrial RS232/RS485 to Ethernet converter, which provides two-way transparent data transmission between RS232/RS485 and RJ45 Ethernet port, it can be configured via web page.

Features

M4 series 32-bit ARM processor with frequency up to 120MHz, fast speed, stable and reliable

10/100M Auto-MDI/MDIX Ethernet interface, regardless of crossover or straight cable

RS232 and RS485 interfaces allow you to work independently at the same time without disturbing each other

Configurable baud rate (600 bps ~ 230.4 Kbps), supports five parity check options: None, odd, even, mark, space

Multiple indicators, to monitor communication and working status

Available operating modes: TCP server, TCP client, UDP server, UDP client, HTTPD client (supports GET and POST)

Supports Modbus, suitable for industrial applications

Supports Websocket, enables two-way transparent data transmission with RS232/RS485 port through web page directly

Configurable via web page, AT commands, serial protocol and network protocol, provides configuration protocol that can be integrated into your own software

Supports custom heartbeat packets, ensure the connection is truthful, as well as actively retrieve sensor data

Supports custom registration packets, automatically transmitting the registered packet as the identifier after establishing the connection, so that different devices can be distinguished

Support custom web page, allow user to customize module configuration page

Support RFC2217 type protocol, be able to communicate with devices whose serial setting (baud rate, data bit, etc.) may change

KeepAlive mechanism, detects interrupted connection, automatically reconnects

Support timeout restart (reboot without data), ensure long-term stable connection, configurable restart time

Supports DNS domain name resolution, configurable DNS server

Supports DHCP, auto-obtained IP or static IP

Firmware is upgradable via network

Restore factory settings via software and/or hardware

Comes with a default MAC address, which is customizable

Software included: module configuration software, TCP/UDP test tool, VCOM virtual serial port software

Example code: host (socket), VB, C++, Delphi, Android, iOS, etc.

Features

Ethernet:

Connector: RJ45 4 pin

Communication rate: 10/100 Mbps

Interface protection: 2KV electromagnetic isolation

Protocols: IP, TCP, UDP, ARP, ICMP, DHCP, DNS, HTTPD Client, Websocket

TX cache: 16 KB

RX cache: 16 KB

RS485/RS232:

Connector:

RS485: screw terminal (A+, B-, GND)

RS232: DB9 male

Data bit: 5 bits, 6 bits, 7 bits, 8 bits

Stop bit: 1, 2

Parity bit: none, odd, even, mark, space

Baud rate: 600 bps ~ 230.4 kbps

TX cache: 2 KB

RX cache: 2 KB

Hardware flow control: RTS/CTS

Interface protection:

RS485: 2KV ESD protection, lightning protection, anti-surge, overcurrent protection

RS485 pull up/down registers: 2.2 KΩ

Power:

Power supply: 5.0 ~ 36.0 V (5 V recommended)

Operating current: 86.5 mA (@ 5 V)

Power consumption: <1W

Interface protection: anti-reverse, ESD protection, anti-surge

Environment:

Operating temperature: -40~85°C

Storage temperature: -40~105°